The same portfolio, configured for four very different climates
A tank chime in Abu Dhabi, a jetty pile in Surabaya, a mine pipe rack in Zambia and a buried water main in Alberta are not the same job. The system changes with the exposure — the supplier does not.
What drives selection where you are
Each page sets out the conditions that govern material choice in that market, the assets the enquiries usually concern, and the measured data that matters most there.
50 °C ambient, extreme UV, sabkha ground
UAE, Saudi Arabia, Qatar, Oman and Kuwait. Reflective foil outer wrap against solar load, higher service temperatures, and 1 000 hours salt spray with no rust for chloride-loaded coastal air.
No dry season to wait for
Singapore, Malaysia, Indonesia, Thailand, Vietnam and the Philippines. No cure window to protect, and a seawater grade formulated to go onto wet or submerged steel without a primer.
No blasting plant, no hot work permit, no specialist crew
Nigeria, Egypt, South Africa, Morocco, Kenya and Ghana. Single-component materials with nothing to mix, applied by trained site labour on remote sites.
Tested to the method set your specs already name
United States and Canada. Wax tape measured against the ASTM and AWWA C217 method set, and viscoelastic peel of 84.5 N/cm at −45 °C for cold-climate work.
One documentation set, wherever the asset is
Every technical data sheet, third-party test report, safety data sheet and certificate is published in English and free to download without a form. A vendor registration pack can be assembled before you ever contact us — which is usually the slowest part of qualifying a new supplier from Asia.
The same applies to what we cannot evidence. The standards page lists the conformity documents we do not hold, so a tender team can rule us in or out on day one rather than in week three.
Documents, no form required
14 data sheets, 8 test reports, 3 safety data sheets, certificates, 5 application solutions and the project reference list.
Material technologies from one plant
Petrolatum, viscoelastic, microcrystalline wax and polyolefin tape — normally four separate suppliers and four qualification exercises.
Tell us where the asset is and what it does
Location, exposure, operating temperature and quantity are enough for us to propose a configuration suited to the climate it has to survive.